Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
11. If the valve body separator plate is not being repaired:
1. Remove the bolt.
2. Install bolt into any case threaded bolt hole on the opposite end of the separator plate.
CAUTION: Prevent the front of the valve body separator plate from sagging and displacing the check balls.
12. Remove the (B) bolts, the (C) nuts and the (D) main control valve body.
NOTE: Do not remove the (A) lower-to-upper main control valve body assembly retaining bolts. Keep the main control valve bodies attached as
an assembly.
