Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
13. Remove the solenoid body assembly.
1. Remove the bolts.
2. Remove the nut.
3. Remove the solenoid body assembly.
14. Remove the solenoid screen assembly by rotating and pulling it.
15. If replacing the valve body separator plate, remove the (A) bolts and the (B) separating plate reinforcing plate.
CAUTION: The steel Electronic Pressure Control(EPC) check ball is spring-loaded under the valve body separator plate.
16. Lower the valve body separator plate and the gaskets carefully, to retain the rubber check balls and the steel EPC check ball and spring assembly.
INSTALLATION
CAUTION: using the incorrect gasket, can cause damage to the transmission.
