Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
13. Using a suitable rear axle companion flange holding too], remove the drive pinion shaft nut.
NOTE: Index mark the rear axle companion flange to the pinion shaft.
14. Using the 2-Jaw Puller, remove the rear axle companion flange.
15. Remove the drive pinion.
-
Using a soft faced hammer and the Pinion Shaft Thread Protector, tap the drive pinion out of the pinion bearing cup and remove through the
rear of the axle housing.
