Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
NOTE: There is a space between the anti-lock speed sensor ring and the ring gear for measuring ring gear back face runout.
6. Loosen the differential case.
1. Remove the four bearing cap bolts.
2. Remove the two bearing caps.
CAUTION: Mark the position of the bearing caps, as arrows may not be visible. The bearing caps must be installed in their identical
locations and positions.
7. Use the pry bar and the wood block to remove the differential case from the rear axle housing.
WARNING: BE CAREFUL NOT TO ALLOW THE DIFFERENTIAL CASE TO FALL.
CAUTION: Place a wood block between the pry bar and the rear axle housing to protect the machined surface from damage.
8. Remove the 10 ring gear bolts.
