Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
9. Insert a punch in the bolt holes and drive off the ring gear and, if necessary, the anti-lock speed sensor ring.
CAUTION: Care should be taken not to damage the ring bolt hole threads.
NOTE: The anti-lock speed sensor ring cannot be reused once removed.
10. Install the differential case.
-
Position the differential case assembly, including the bearing clips and shims, in the rear axle housing. Install the differential bearing caps and
the differential bearing cap bolts.
11. Position the Dial Indicator with Bracketry.
1. Rotate the differential case to ensure the differential bearings are properly seated.
2. Position the Dial Indicator with Bracketry.
