Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
Special Tools
REMOVAL
1. Remove the differential case.
2. Mark the driveshaft flange and the driveshaft rear axle companion flange for correct alignment during installation.
3. Remove the four rear driveshaft bolts and disconnect the rear driveshaft.
4. Install an Nm (inch lbs.) torque wrench on the pinion nut and record the torque required to maintain rotation of the pinion through several
revolutions.
5. Remove the rear axle companion flange and pinion nut.