Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
1. Drive the outer pinion bearing cup into the axle housing using the Pinion Bearing Cup Replacer and Driver Handle.
2. Drive the inner pinion bearing cup into the axle housing using the Pinion Bearing Cup Replacer and Driver Handle.
3. Make sure the cups are properly seated in their bores.
CAUTION: Whenever the cups are replaced, the pinion bearings must also be replaced.
NOTE: If a feeler gauge can be inserted between a cup and the bottom of its bore at any point around the cup, the cup is not properly seated.
4. Assemble and position the Pinion Depth Gauge.
