Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
Special Tools
REMOVAL
1. Remove the rear axle companion flange.
2. Pry up on the metal flange of the pinion seal. Install gripping pliers and strike with a hammer until the pinion seal is removed.
INSTALLATION
1. Lubricate the new pinion seal.
-
Use Premium Long-Life Grease XG-1-C or equivalent meeting Ford specification ESA-M1C75-B.
2. Use the Pinion Seal Replacer to install the pinion seal.
CAUTION: If the pinion seal becomes misaligned during installation, remove the seal and replace.
3. Install the rear axle companion flange.