Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
Companion Flange: Service and Repair
8.8-Inch Ring Gear
Special Tools
REMOVAL
1. Remove the rear brake drums.
NOTE: The rear wheels and brake drums must be removed to prevent brake drag during drive pinion bearing preload adjustment.
2. Mark the driveshaft flange and rear axle companion flange for correct alignment during installation.
3. Remove the four driveshaft bolts and disconnect the driveshaft.
-
Wire the driveshaft out of the way.
