Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
Universal Joint: Service and Repair
Single Cardan, Flange Yoke - Disassembly and Assembly
DISASSEMBLY
1. Remove the driveshaft.
2. Place the driveshaft on a suitable workbench, being careful not to damage the tube.
CAUTION: Do not clamp the driveshaft in a vise or similar holding fixture.
3. Mark the positions of the driveshaft components.
NOTE: If components are not marked and installed correctly, driveline imbalance can occur.
4. Clamp the U-Joint Tool in a vise.
5. Remove all four of the snap rings.