Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
Axle Shaft: Service and Repair
Dana
Removal
1. Remove the axle shaft bolts.
^
Place a drain pan under the rear hub.
2. Remove the axle shaft.
3. Inspect the following components:
^
The rear axle shaft gasket for damage, install new gasket as necessary.
^
The axle shaft for cracks around the bolt holes.
Installation
1. NOTE: If the original bolts are being reused, apply a suitable thread adhesive to the bolts.
NOTE: Torque specifications are the same for SRW or DRW vehicles.