Econoline E550 V10-6.8L VIN S (2003)
8. NOTE: Do not discard the gasket unless damaged. This is a reusable gasket.
Drain the fluid and remove the transmission fluid pan and the gasket.
1
Loosen, but do not remove, the bolts.
2
Remove the front and side bolts.
3
Lower the front of the fluid pan and allow the fluid to drain.
4
Remove the remaining bolts and the fluid pan.
All vehicles
9. NOTE: After removal, discard the filter and seal assembly.
Remove the filter and seal assembly by carefully pulling and rotating the filter as necessary.
10. CAUTION: Be careful not to scratch or damage the aluminum bore or the new seal may leak.
If the seal remains in the pump bore, remove it carefully with a small screwdriver so as not to scratch or damage the aluminum bore.