Econoline E550 V10-6.8L VIN S (2003)
![background image](/ford/econoline_e550/v10-6.8l_vin_s/Page-1547006.png)
11. Using the special tool, remove the pinion bearing cone and roller assembly.
12. NOTE: Do not remove the pinion bearing cups from the carrier casting unless the cups are damaged.
Using the special tools, remove the outer differential bearing cup.
13. Using the special tools, remove the inner differential bearing cup.
Installation
Using 205-024
1. Position the special tools and the inner and outer bearing cups in their respective bores.
1
After placing the inner and outer bearing cups in their bores, place the special tool (inner) on the inner pinion bearing cup.
2
Place the special tool (outer) on the outer pinion bearing cup.
3
Install the special tool.