ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3071 > < Initial Inspection and Diagnostic Overview|Page 3069
Page 58
background image

GO to U19.

-------------------------------------------------
U18 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE LTM DISCONNECTED

-

Disconnect: LTM C4174b.

-

Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and the DLC C251-11, circuit VDB07 (VT/OG), harness
side.

-

Is the resistance less than 5 ohms?

Yes

GO to U19.

No

CONNECT the negative battery cable. GO to U50.

-------------------------------------------------
U19 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE IC DISCONNECTED

-

Disconnect: Instrument Cluster (IC) C220.

-

Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and the DLC C251-11, circuit VDB07 (VT/OG), harness
side.

-

Is the resistance less than 5 ohms?

Yes

If the vehicle is equipped with a Satellite Digital Audio Receiver System (SDARS) module, GO to U20.

If the vehicle is not equipped with a SDARS module, GO to U21.

No

CONNECT the negative battery cable. GO to U49.

-------------------------------------------------
U20 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE SDARS MODULE
DISCONNECTED

-

Disconnect: SDARS Module C4344.

-

Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and the DLC C251-11, circuit VDB07 (VT/OG), harness
side.

-

Is the resistance less than 5 ohms?

Initial Inspection and Diagnostic Overview|Page 3071 > < Initial Inspection and Diagnostic Overview|Page 3069