ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3072 > < Initial Inspection and Diagnostic Overview|Page 3070
Page 59
background image

Yes

GO to U21.

No

CONNECT the negative battery cable. GO to U48.

-------------------------------------------------
U21 VERIFY VEHICLE EQUIPMENT - DSM

-

Inspect the vehicle for a Driver Seat Module (DSM).

-

Is the vehicle equipped with a DSM?

Yes

GO to U22.

No

GO to U23.

-------------------------------------------------
U22 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE DSM DISCONNECTED

-

Disconnect: DSM C3299d.

-

Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and the DLC C251-11, circuit VDB07 (VT/OG), harness
side.

-

Is the resistance less than 5 ohms?

Yes

GO to U23.

No

CONNECT the negative battery cable. GO to U51.

-------------------------------------------------
U23 VERIFY VEHICLE EQUIPMENT - DCSM

-

Inspect the vehicle for a Dual Climate Controlled Seat Module (DCSM).

-

Is the vehicle equipped with a DCSM?

Yes

GO to U24.

No

GO to U25.

-------------------------------------------------
U24 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE DCSM DISCONNECTED

-

Disconnect: DCSM C3036c.

-

Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and the DLC C251-11, circuit VDB07 (VT/OG), harness
side.

Initial Inspection and Diagnostic Overview|Page 3072 > < Initial Inspection and Diagnostic Overview|Page 3070