Edge FWD V6-3.5L (2007)
-
To install, tighten to 12 Nm (9 lb-ft).
12. Remove the access plug from the latch side of the door and remove the outside door handle reinforcement screw.
13. Remove the outside door handle.
14. Remove the screw.
-
To install, tighten to 8 Nm (71 lb-in).
15. If equipped, remove the door keypad.
16. Remove the 9 door module bolts and remove the rear door module, transfer parts as necessary.
-
To install, tighten to 9 Nm (80 lb-in).
17. To install, reverse the removal procedure.