Edge FWD V6-3.5L (2007)
Driver/Vehicle Information Display: Description and Operation
INFORMATION AND MESSAGE CENTER
The message center is a fixed format vacuum fluorescent display, integrated into the instrument cluster. The message center functions are controlled by
the message center switches. The message center displays important vehicle information by constantly monitoring different vehicle systems. The message
center informs the driver of vehicle operations and notifies the driver of potential vehicle problems by displaying a warning message pertaining to the
system in which a fault has been detected.
The message center provides the following features:
-
Information displays
-
Setup displays
-
System check messages
-
System warning messages
The message center information can be selected through a set of 3 buttons:
-
INFO
-
SETUP
-
RESET
Message Center Configuration
The message center has the capability to configure items such as units (English or metric), autolamp delay, to enable/disable a variety of options such
as autolock, auto-unlock and easy entry/easy exit (if equipped), or to carry out calibrations/settings on items such as the compass.
On configurable items such as autolock, auto-unlock or easy entry/easy exit the message center indicates the appropriate selection (ON/OFF) by
bracketing the selection. For example, if the driver selects the autolock feature on, the message would display as follows: AUTOLOCK <ON> OFF. If
the driver selects the autolock off, the message would display as follows: AUTOLOCK AID ON <OFF>.
Compass Display
The message center provides a compass display and uses directional information sent from a compass module, located on the underside of the inside
rear view mirror.
Information Displays
The information displays are non-timed modes. The selected mode remains on until the driver presses a message center button to change the mode or
it is overridden by another mode.
The information (INFO button) display modes are:
-
Odometer
-
Compass
-
Trip odometer A or B
-
Distance to empty (DTE)
-
Average fuel economy
-
Average speed
-
Trip elapsed drive time 1 or 2
Setup Displays
The setup (SETUP button) displays are timed modes and terminate after a finite interval. The setup display modes are:
-
System check
-
Units English/metric
-
Autolamp delay in seconds (if equipped)
-
Autolock on/off (if equipped)
-
Auto-unlock on/off (if equipped)
-
Power liftgate on/off (if equipped)
-
Easy entry/easy exit seat on/off (if equipped)
-
Reverse parking aid on/off (if equipped)
-
Language
System Check
The system check provides a check of all the monitored systems on the vehicle. The system check scrolls through each of the monitored systems and
provides a visual indication to report out the status of each system. The message center displays OK for approximately 2 seconds if the system check
does not detect a fault in the system and displays a warning message for approximately 2 seconds if the system check detects a fault in the system.
Press the RESET button to scroll through the system check messages.
The systems monitored during the system check are:
-
Door ajar
-
Engine temperature