Edge FWD V6-3.5L (2007)
10. Remove the 2 passenger air bag module bolts from the cross vehicle beam bracket.
11. CAUTION: Do not handle the passenger air bag module by grabbing the edges of the deployment doors. Damage to the air bag module
may occur.
Through the glove compartment opening, release the 4 LH side deployment door clips. Then release the forward-most 5 clips and separate the
deployment door and passenger air bag module from the I/P.
12. Using a small screwdriver as shown, lift up and release the locking button on the RH passenger air bag module electrical connector.
13. CAUTION: Do not pull the passenger air bag module electrical connector out by the locking button. Damage to the locking button may
occur.
With the RH locking button released, remove the RH electrical connector.