Edge FWD V6-3.5L (2007)
14. Using a small screwdriver as shown, lift up and release the locking button on the LH passenger air bag module electrical connector.
15. CAUTION: Do not pull the passenger air bag module electrical connector out by the locking button. Damage to the locking button may
occur.
With the LH locking button released, remove the LH electrical connector and remove the passenger air bag module.
MKX
16. Pull straight out to release the 5 retaining clips and remove the RH I/P finish panel.
17. Remove the screw for the LH duct assembly bracket from the front of the I/P.
18. Through the glove compartment opening, remove the screw and the LH duct assembly.