Edge FWD V6-3.5L (2007)
Removal
NOTE: There are 2 rear drive unit (RDU) bushings in the rear subframe, this procedure shows how to remove one bushing. The procedure for the
remaining RDU bushing is identical.
1. Remove the rear drive unit.
2. NOTE:
-
Make sure the 204-617/2 is positioned with the larger opening toward the bushing to act as the receiver cup.
-
Make sure the arrow on the special tool is pointed toward the rear subframe when removing the bushing.
Assemble the special tools to the rear subframe and press out the bushing.
Installation
NOTE: There are 2 RDU bushings in the subframe, this procedure shows how to install one bushing. The procedure for the remaining RDU bushing
is identical.
