Edge FWD V6-3.5L (2007)
1. NOTE: Make sure the alignment marks on the special tool are aligned with the anti-rotation tabs on the RDU bushing.
Install the RDU bushing into the special tool.
2. NOTE: Make sure the alignment marks are correctly aligned on both special tools and the anti-rotation tabs are correctly seated in the special
tool.
Install the special tool onto the RDU bushing.
3. NOTE:
-
Make sure the arrow on the special tool is visible on the bottom and facing away from the subframe. The arrow must remain straight so that the
bushings are correctly indexed into the subframe.
-
When installing the RDU bushing, 204-617/2 will fall away as the RDU bushing is installed into the subframe. The special tool does not
control the depth of the bushing, continue to tighten the nut until the RDU bushing is fully seated into the subframe.
Install the RDU bushing into the subframe.
4. Install the RDU.
