Escape 2WD L4-122 2.0L DOHC VIN B SFI (2001)
1
Align the rear hatch scuff plate and push in, fastening the retainers.
2
Install the pin-type retainers.
4. Install the rear hatch weather-stripping.
5. Install the spacer onto the rear safety belt guide bolt.
6. Install the rear safety belt guide.
1
Position the safety belt guide.
2
Using the special tool, install the bolt.
NOTE: Make sure the safety belt webbing is not twisted prior to installation.
7. Install the rear safety belt guide cover.
NOTE: If the safety belt guide cover is damaged or if it does not remain in position, install a new cover.