Escape 2WD L4-2.5L (2009)
Install the oil pump chain, sprocket and bolt.
NOTICE: The Camshaft Alignment Plate is for camshaft alignment only. Using this tool to prevent engine rotation can result in engine damage.
Install the Camshaft Alignment Plate in the slots on the rear of both camshafts.
Install the camshaft sprockets and the bolts. Do not tighten the bolts at this time.
Install the timing chain.
NOTICE: The Camshaft Alignment Plate is for camshaft alignment only. Using this tool to prevent engine rotation can result in engine damage.
Using the flats on the camshafts to prevent camshaft rotation, tighten the bolts.
NOTE: Do not install the crankshaft pulley bolt at this time.
Position the crankshaft pulley onto the crankshaft with the hole in the pulley at the 6 o'clock position.
