Escape 4WD L4-2.5L Hybrid (2009)
Radiator Cooling Fan Motor: Service and Repair
Cooling Fan Motor and Shroud
Removal and Installation
1. With vehicle in NEUTRAL, position it on a hoist.
2. Remove the front bumper cover.
3. Remove the 2 front impact severity sensors. For additional information, refer to Air Bag Systems.
4. Remove the 4 bolts and the 2 radiator brackets.
-
To install, tighten to 10 Nm (89 lb-in).
5. NOTE: Mark the hood latch position prior to removal of the bolts.
