ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

High-Voltage Traction Battery|Page 2106 > < High-Voltage Traction Battery|Page 2104
Page 3
background image

locally.

13. NOTICE: Use chain lengths as specified. Changing the chain length may result in damage to the High Voltage Traction Battery (HVTB)

or HVTB lifting points.

Attach the lengths of chain to the eyebolts and the lifting device.

14. NOTICE: Make certain the High Voltage Traction Battery (HVTB) does not mar or damage the interior panels during removal. There is

only 6 mm (0.23 in) clearance on each side.

With an assistant, lift the HVTB off the 2 alignment dowels using a floor crane.

15. NOTE: Do not strike the headliner with the HVTB (or floor crane) during removal.

Cover the battery mounting brackets with protective padding and remove the HVTB from the vehicle.

16. Inspect the HVTB tray drain grommet located in the floor pan underneath the HVTB. Replace if necessary.

17. To install, reverse the removal procedure.

High-Voltage Traction Battery|Page 2106 > < High-Voltage Traction Battery|Page 2104