Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
Air Door Actuator / Motor: Service and Repair
Outside Air Inlet Vacuum Control Motor
REMOVAL
1. Remove the instrument panel. Refer to: Body and Frame, Interior Moulding/Trim, Dashboard/Instrument Panel, Service and Repair, Removal and
Installation, See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal and Installation
2. Remove the vacuum control motor.
1
Disconnect the vacuum line.
2
Remove the two screws.
3
Disconnect the vacuum control motor from the door lever.
INSTALLATION
1. To install, reverse the removal procedure.