Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
Air Door Cable: Service and Repair
Alignment Pin, Temperature Blend Door
SPECIAL TOOL(S)
REMOVAL
1. Disconnect the negative battery cable.
2. Lower the glove compartment door.
^
Press the glove compartment release tabs inward while pulling downward on the glove compartment.
3. Disconnect the temperature blend door control cable.
1
Align the locator holes and insert the special tool.
2
Release the locking tab.
3
Remove the temperature blend door control cable from the blend door shaft.