Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
![background image](/ford/escape_4wd/v6-181_3.0l_dohc_vin_1_duratec/Page-1697001.png)
Output Yoke/Flange: Service and Repair
Transfer Case Rear Output Shaft Flange
Transfer Case Rear Output Shaft Flange
Special Tool(s)
Removal
1. Remove the transfer case.
2. CAUTION: Rotational torque of the companion flange must be measured and recorded for correct pinion bearing preload when reassembled.
Using the special tool, remove the pinion nut.
3. CAUTION: Mark the companion flange relative to the pinion spline.
Using the special tool, remove the companion flange.
Installation