ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Transfer Case Rear Output Shaft Flange|Page 4943 > < Transfer Case Rear Output Shaft Flange

Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)

Page 2
background image

1. CAUTION:  Install the companion flange to engage the spline as previously marked.

Using the special tool, install the companion flange.

2. CAUTION:  Do not over tighten the pinion nut. Refer to the rotational torque previously recorded.

Install the pinion nut.

3. Install the transfer case. 

Transfer Case Rear Output Shaft Flange|Page 4943 > < Transfer Case Rear Output Shaft Flange