Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
Output Yoke/Flange: Service and Repair
Transfer Case Rear Output Shaft Flange Dust Shield
Transfer Case Rear Output Shaft Flange Dust Shield
Special Tool(s)
Removal
1. Remove the companion flange.
2. Remove the companion flange dust shield.
Installation
1. Using the special tool, install the companion flange dust shield.
2. Install the companion flange.
3. NOTE: Refill capacities are determined by filling the transfer case to the bottom of the filler hole.
Check the transfer case oil level.