Escape 4WD V6-3.0L (2008)
fuel-related component. Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in
serious personal injury.
1. Rotate the lock tab on the quick connect coupling.
2. NOTE: When reusing liquid or vapor tube connectors, make sure to use compressed air to remove any foreign material from the connector
retaining clip area before separating from the tube.
Disconnect the quick connect coupling from the fitting.
-
Pull on the quick connect coupling and separate from the fitting.
Connect - Type II
1. NOTE: Apply clean engine oil to the end of the tube and the quick connect coupling O-ring seals.
Rotate the lock tab and install the quick connect coupling onto the fitting.
2. NOTE: Make sure the fuel tube clicks into place when installing the tube. To make sure that the fuel tube is fully seated, pull on the tube.
Release the lock tab into the latched position.
