Escape 4WD V6-3.0L (2008)
4. Install the main control valve body assembly. Tighten the bolts in the sequence indicated.
^
Tighten to 10 Nm (89 lb-in).
5. NOTE: The main control cover gasket is a reusable type. Inspect the gasket for damage. Install a new gasket as necessary.
Install the main control cover gasket.
6. NOTE: Install the cooler bypass valve studs in locations 3 and 11.
Install the main control cover. Tighten the bolts and studs in the indicated sequence.
^
Tighten to 13 Nm (10 lb-ft).
