ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

External Vacuum Method|Page 7535 > < External Vacuum Method
Page 2
background image

9. Cycle steering wheel fully to the left and right every 30 seconds for approximately five minutes. 

NOTE:  Do not hold steering wheel on stops.

10. Turn engine OFF.
11. Release vacuum and remove Vacuum Tester and accessories.
12. Check the power steering fluid level. Add fluid if necessary. Install reservoir cap.
13. Start the engine.
14. Cycle steering wheel fully to the left and right every 30 seconds for approximately five minutes.

NOTE:  Do not hold steering wheel on stops.

15. Repeat air purging procedures if necessary.

External Vacuum Method|Page 7535 > < External Vacuum Method