Excursion 4WD V10-6.8L VIN S (2000)
![background image](/ford/excursion_4wd/v10-6.8l_vin_s/Page-926010.png)
Tighten the bolts in the sequence shown.
^
Stage 1: Tighten to 2 Nm (18 inch lbs.).
^
Stage 2: Tighten to 8-12 Nm (71-106 inch lbs.).
3. If necessary, install the fuel injector supply manifold.
^
Position the fuel injection supply manifold.
^
Install the seven bolts.
4. Position the water thermostat and housing.