Excursion 4WD V10-6.8L VIN S (2000)
![background image](/ford/excursion_4wd/v10-6.8l_vin_s/Page-926011.png)
5. Install the upper intake manifold.
^
Position the upper intake manifold gaskets and the intake manifold, and loosely install the bolts.
6. Tighten the bolts in two stages, in the sequence shown.
^
Stage 1: Tighten to 2 Nm (18 inch lbs.).
^
Stage 2: Tighten to 20-30 Nm (15-22 ft. lbs.).