Excursion 4WD V10-6.8L VIN S (2000)
![background image](/ford/excursion_4wd/v10-6.8l_vin_s/Page-944008.png)
Position the power steering pump and install the bolts.
10. Install the drain plug.
11. Lower the vehicle.
12. Install the valve covers.
13. Install the water pump.
14. On bi-fuel vehicles, install the compuvalve and vaporizer.
15. Install the radiator.
16. Fill the engine with oil.
^
Use Super Premium SAE 5W-30 Motor Oil XO-5W30-QSP or equivalent meeting Ford specification WSS-M2C153-G.
17. Connect the battery ground cable.