Excursion 4WD V10-6.8L VIN S (2000)
2. Remove the safety belt buckles.
1
Use the T-55 Torx bit to remove the LH safety belt buckle bolt.
2
Use the T-55 Torx bit to remove the RH safety belt buckle bolt.
3. Remove the safety belt buckles.
1
Remove the LH safety belt buckle.
2
Remove the RH safety belt buckle.
INSTALLATION
1. Follow the removal procedure in reverse order.
NOTE:
^
Make sure the safety belt webbing is not twisted prior to installation.
^
Make sure to tighten bolts to specification.
2. Check the restraint system for correct operation.