Excursion 4WD V10-6.8L VIN S (2000)
NOTE:
^
Driver side is shown, passenger side is similar.
^
Drivers side front half quarter trim panel is only necessary to remove.
17. Disconnect the power point electrical connector and remove the quarter trim panel.
NOTE: Driver side is shown, passenger side is similar.
Second row retractor only
18. Remove the second row safety belt retractor.
1
Using the special tool 501-010 (T77L-2100-A), remove the bolt.
2
Remove the second row safety belt retractor.
Third row retractor only
19. Remove the third row safety belt retractor.
1
Using the special tool 501-010 (T77L-21 00-A), remove the bolt.
2
Remove the third row safety belt retractor.
INSTALLATION
Third row retractor only