Excursion 4WD V10-6.8L VIN S (2000)
![background image](/ford/excursion_4wd/v10-6.8l_vin_s/Page-1760006.png)
Make sure the cups are properly seated in their bores.
^
If a feeler gauge of the specification shown in the illustration can be inserted between a cup and the bottom of its bore at any point around the
cup, the cup is not properly seated.
6. Note: Apply only a light oil film on the pinion bearings before assembling the tool.
Assemble and position the special tools.
7. Note: This step duplicates final pinion bearing preload.