Expedition 2WD V8-281 4.6L SOHC (1998)
Alignment: Service and Repair
Caster and Camber
1. Remove the alignment plate.
(1) Remove the upper suspension arm adjusting nuts.
(2) Remove the alignment plate.
2. Install the washers and the adjusting nuts.
3. To increase caster and camber, use the following steps.
(1) To increase caster move the front of the front suspension upper arm outboard and move the rear of the front suspension upper arm inboard.
(2) To increase camber, move the front suspension upper arm outboard equally.
NOTE: A pry bar can be used between the front suspension upper arm and the frame pocket to aid in moving the arm.
