Expedition 2WD V8-281 4.6L VIN W EFI (1997)
3. Install bearing and a new wheel hub grease seal.
4. Install the front disc brake hub and rotor.
a. Position the front disc brake hub and rotor on spindle.
b. Install the outer front wheel bearing.
c. Install the front wheel outer bearing retainer washer.
d. Install the spindle nut.
NOTE: The front disc brake hub and rotor should be rotated while adjusting front wheel bearing end play.
5. Tighten the spindle nut to 40 Nm (30 ft. lbs.).
Loosen Spindle Nut
6. Loosen the (A) spindle nut two turns.