Expedition 2WD V8-281 4.6L VIN W EFI (1997)
7. Tighten the spindle nut while rotating the rotor counterclockwise to 23-34 Nm (17-24 ft. lbs.).
8. Loosen the spindle nut.
9. Tighten the spindle nut to 2 Nm (17 inch lbs.).
10. Install the following components:
a. Install the retainer nut.
b. Install the cotter pin.
c. Install the hub grease cap.
11. Install the front disc brake caliper anchor plate.
Rear
REMOVAL