Expedition 2WD V8-281 4.6L VIN W EFI (1997)
1. Remove the rear disc brake caliper.
NOTE: When removing the rear disc brake caliper in this procedure it is not necessary to disconnect the brake hose.
Remove Rear Disc Brake Rotor
2. Remove the rear disc brake rotor and axle hub channel.
NOTE: If the rear disc brake rotor binds on the parking brake shoe and lining, remove the adjustment hole access plug and contract the parking
brake shoe and lining.
Measure Rear Disc Brake Rotor Tickness
3. Inspect the rear disc brake rotor.
NOTE: Replace the rear disc brake rotor if not within 12 mm (0.472 inch).
INSTALLATION
1. To install, reverse the removal procedure.