Expedition 2WD V8-281 4.6L VIN W EFI (1997)
Band Apply Servo: Service and Repair
Overderive Servo
REMOVAL
1. Remove the main control valve body.
2. Use the (A) Servo Piston Remover/Replacer to compress the servo spring, then remove the (B) overdrive servo retaining ring.
CAUTION: If the tool is not available, extreme care must be taken. Spring pressure will force the overdrive servo piston assembly out of the
case. Case bore damage can result from trying to pry on the overdrive servo internal retaining ring.
3. Remove the (A) overdrive servo piston and the (B) overdrive servo piston return spring.
INSTALLATION
1. Install the overdrive servo piston assembly.
(1) Install the overdrive servo piston return spring.
(2) Install the overdrive servo piston assembly.