ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Brake Caliper Bracket|Page 5616 > < Brake Caliper Bracket|Page 5614
Page 4
background image

Loosen the lug nuts.
1. Remove the center cap.
2. With the weight of the vehicle on the wheels, loosen the lug nuts.

2. WARNING:  The electrical power to the air suspension system must be shut off prior to hoisting, jacking or towing an air suspension

vehicle. This can be accomplished by turning off the air suspension switch located in the RH kick panel area. Failure to do so can result in
unexpected inflation or deflation of the air springs, which can result in shifting of the vehicle during these operations.
 

Raise and support the vehicle.

3. Remove the wheel and tire assembly. 

1. Remove the lug nuts. 
2. Remove the wheel and tire assembly.

4. CAUTION:  Replace the lining if worn to or past the specified thickness above the metal backing plate or rivets. Replace the pads in

complete axle sets. 

Inspect the pads for wear or contamination.

5. WARNING:  Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If

brake fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally,
drink water and induce vomiting, get medical attention immediately.
 

Disconnect the front brake hose. 
1. Remove the front brake hose bolt. 
2. Disconnect the front brake hose.
3. Remove the copper washers. Plug the front brake hose.

Brake Caliper Bracket|Page 5616 > < Brake Caliper Bracket|Page 5614