Expedition 2WD V8-4.6L SOHC VIN 6 (1999)
6. Remove the disc brake caliper.
1. Remove the two caliper bolts using a T45 Torx(R).
2. Lift the disc brake caliper off the front disc brake caliper anchor plate.
7. On 4x2 vehicles, measure the brake disc thickness.
-
Replace the brake disc and hub if not within specification.
8. On 4x4 vehicles, measure the brake disc thickness.
-
Replace the brake disc if not within specification.
9. Inspect the disc brake caliper for leaks.
-
If leaks are found, disassembly is required.
Installation