Expedition 2WD V8-5.4L (2009)
Rear Door Latch: Removal and Replacement
Rear Door Latch
Removal and Installation
NOTE: The rear door window glass must be completely raised.
1. Remove rear door trim panel.
-
Position the watershield aside.
2. Remove and discard the 3 bolts and position the rear door latch aside.
-
To install, tighten to 12 Nm (106 lb-in).
3. Open the clip and disconnect the exterior door handle actuating rod.
4. Disconnect the electrical connectors.
5. Release the interior door handle actuating cable and remove the rear door latch.
1. Position the cable cover aside.