Expedition 2WD V8-5.4L (2009)
Trim Panel: Service and Repair
B-Pillar Trim Panel
B-Pillar Trim Panel
Removal and Installation
Upper and lower
1. Move the front seat to the full forward position.
2. NOTE: Position the shoulder safety belt guide to the lowest position.
NOTE: Inspect the shoulder safety belt guide cover for damage. If the shoulder safety belt guide cover is damaged or the cover does not remain
closed, install a new shoulder safety belt guide cover.
Remove the shoulder safety belt guide cover.
-
Detach the top of the shoulder safety belt guide cover.
-
Rotate the shoulder safety belt guide cover 90 degrees and remove from the safety belt guide bolt.
3. Remove the shoulder safety belt guide.
-
Remove the shoulder safety belt guide bolt.
-
To install, tighten to 40 Nm (30 lb-ft).
-
Remove the shoulder safety belt guide.
4. NOTICE: To avoid damage to the upper B-pillar trim panel, remove any retaining clips from the body and attach them to the upper
B-pillar trim panel before installing.
Remove the upper B-pillar trim panel.
1. Remove the bolt cover and bolt.
-
To install, tighten to 8 Nm (71 lb-in).
2. Remove the upper B-pillar trim panel by pulling outward to release the clips.
Lower
