Expedition 2WD V8-5.4L (2009)
5. Remove the front and rear door scuff plates.
6. NOTICE: To avoid damage to the lower B-pillar trim panel, remove any retaining clips from the body and attach them to the lower
B-pillar trim panel before installing.
Pull outward to release the lower B-pillar trim panel clips and reposition the lower B-pillar trim panel.
7. Remove the front safety belt anchor bolt.
-
To install, tighten to 40 Nm (30 lb-ft).
8. Feed the safety belt through the lower B-pillar trim panel and remove.
Upper and lower
9. To install, reverse the removal procedure.
-
When installing the upper B-pillar trim panel, insert the safety belt guide slide into the upper B-pillar trim panel.