Expedition 2WD V8-5.4L (2009)
7. NOTE: LH shown, RH similar.
Remove the 6 LH and RH air deflector-to-condenser core pin-type retainers.
8. Disconnect the 2 transmission fluid cooler-to-radiator hoses.
9. NOTE: The cooling module must be positioned rearward to raise and detach the 4 condenser mounts from the radiator.
Depress the retaining tabs on the 2 lower condenser mounting brackets and raise the condenser assembly until the 4 condenser mounting brackets
detach from the radiator.
10. Remove the radiator.
11. To install, reverse the removal procedure.
-
Fill the transmission fluid level.
